Model : TRS - S
Finish : Painted / Hot-Dip Galvanized
Trench Struts are safe and simple for bracing trench linings and are available in 3 sizes providing large number of adjustment from 0.48mm to 1.73mm.
- Labour cost drastically reduced.
- No cutting and nailing of timber shuttering
- Easy to handle, saves transport costs and storage space.
- No loose parts hence longer life.
| Size | Length Closed | Length Extended | Weight in kgs |
| 1 | 0.48 | 0.71 | 6.8 |
| 2 | 0.71 | 1.73 | 8.1 |
| 3 | 1.02 | 1.73 | 11.8 |
Model : C.C-S
Finish : Painted/Hot-Dip Galvanized
Quickly adjusted and locked to ensure clamping of steel and timber forwork for concrete columns.
- Save time, Labour and Wastage
- 3 sizes of arm are Interchangeable and suit both square and rectangular sections.
- Flexible, Galvanized wires avoid broken chain and lost wedges.
| Length of arm | Distance between Arms | ||
| Size | M | Min | Max |
| 1 | 0.87 | 0.25 | 0.69 |
| 2 | 1.16 | 0.37 | 0.97 |
| 3 | 1.59 | 0.59 | 1.41 |
Model - F.H.
Finish : Painted
BSL Fork Head drops into the head of the prop to carry timber beam and to ensure concentric loading. Vertical flanges are drilled for mailing or screwing. It is advisable to use 100mm long unit for single timbers and 200mm long unit where two timbers butt together.
| Length (mm) | Width (mm) | Weight (kg) |
| 100 | 86 | 2.2 |
| 200 | 86 | 3.9 |
Model -ABS -S
Finish : Zinc plated / Hot Dip Galvanized
Base jacks is used to provide height adjustments and a flat bearing surface for distributing load from Standard and other load bearing scaffold tube and scaffold frames. Jacks are also available with swivel base
plate.
With Robust Stub ACME thread, Base plate 0.150m x 0.150m x 0.006m, this base jack provide adjustment from 75mm to 660mm
(Jacks are also available on special sizes on request)
